Installation and wiring, What is included in the box, Before starting – Clarion VMA770 User Manual

Page 12

Advertising
background image



English

4.

INSTALLATION AND WIRING

Read these instructions and the following precautions carefully.

What is included in the box

In addition to this manual, the box contains:

Either a VMA570 (5.6-inch) or VMA770 (7-inch) monitor unit with wiring harness

() .M A/V RCA cable

() power cable

() 5cm .5mm Jack to RCA adaptor cable

Owner’s manual & Installation guide

Bezel

Metal insert card

Before Starting

Disconnect the negative (-) battery terminal on the vehicle’s battery.

WARNING !

To prevent short circuits during installation,
be sure to disconnect the battery.

Precautions

This unit is exclusively for vehicles with a negative ground, V power supply.

Do not open the case. There are no user-serviceable parts inside. If you require
assistance, consult your Clarion dealer or an authorized Clarion service center.

Use a soft dry cloth to clean the screen. Never use a rough cloth, thinner, benzene,
alcohol, or other solvent. The screen surface is easy to scratch, do not rub it when
cleaning.

Always use great care when attaching anything to a vehicle! Visually inspect all
sides of any potential screw location to ensure no damage will occur.

WARNING !

NEVER install this monitor where it is visible from the driver’s
seat, or where it could injure any vehicle occupant in case of an
accident. Ensure that your installation does not create risk of
head-strike injury, and that the monitor will remain securely
mounted in the case of an accident or sudden maneuver.

Advertising