Printing on specialty media, Loading standard trays and optional trays, Windows – Dell 5210n Mono Laser Printer User Manual
Page 105: Mac os 9, Mac os x
The job will print or be deleted according to the type of print job and action you selected.
Printing on Specialty Media
Media is paper, card stock, transparencies, labels,and envelopes. The last four are sometimes referred to as specialty media. Follow these instructions to print
on specialty media.
1.
Load the media as specified for the tray being used. See
Loading Standard Trays and Optional Trays
2.
From the printer operator panel, set the Paper Type and Paper Size according to the media you loaded. See
Setting the Paper Type and Paper Size
for
help.
3.
From the computer software application, set the paper type, size, and source according to the media you loaded.
Windows
1.
With your document open, click File® Print.
2.
Click Preferences, Properties, Options, or Setup (depending on the program or operating system).
3.
Click the Paper tab.
A paper tray list will appear.
4.
Select the tray containing the specialty media.
5.
Select the media type (transparencies, envelopes, and so on) from the Paper Type list box.
6.
Select the size of the specialty media from the Paper Size list box.
7.
Click OK, and then send the print job as usual.
Mac OS 9
1.
Select File® Page Setup.
2.
Select the size of the specialty media from the Paper pop-up menu, and then click OK.
3.
Select File® Print.
4.
With General selected on the top pop-up menu, go to the Paper Source pop-up menu, and select the tray containing the specialty media or the name
of the media.
5.
Click Print.
Mac OS X
1.
Select File® Page Setup.
2.
Select the printer from the Format for pop-up menu.
3.
Select the size of the specialty media from the Paper pop-up menu, and then click OK.
4.
Select File® Print.
5.
On the Copies & Pages pop-up menu, select Imaging.
6.
Select the specialty media on the Paper Type pop-up menu.
7.
On the Imaging pop-up menu, select Paper Feed.
8.
Select the tray containing the specialty media from the All pages from or First page from / Remaining from pop-up menus.
9.
Click Print.
Loading Standard Trays and Optional Trays
The printer has a 500-sheet standard tray. You may have also purchased one or more 250-sheet or 500-sheet optional trays. The steps for loading a 250-
sheet tray or 500-sheet tray are the same.
To load print media:
1.
Remove the tray from the printer, and place it on a flat, level surface.
NOTE:
If you have difficulty, click Help, and then follow the driver instructions.