Video connections, Preemption warning – Dell POWEREDGE M1000E User Manual

Page 192

Advertising
background image

Configuring Soft Switching

To configure OSCAR for soft switching:

1.

Press <Print Screen> to launch the OSCAR interface.
The Main dialog box appears.

2.

Click Setup and then Menu.
The Menu dialog box appears.

3.

Select Name or Slot for the Display/Sort Key.

4.

Type the desired delay time in seconds in the Screen Delay Time field.

5.

Click OK.

Soft Switching to a Server

To soft switch to a server:

To select a server, press <Print Screen>. If the display order of your server list is by slot as per your selection (that
is, the Slot button is depressed), type the slot number and press <Enter>
or
If the display order of your server list is by name as per your selection (that is, the Name button is depressed), type
the first few characters of the name of the server to establish it as unique and press <Enter>.

To switch back to the previous server, press <Print Screen> then <Backspace>.

Video Connections

The iKVM has video connections on the front and rear panels of the chassis. The front panel connection signals take
precedence over that of the rear panel. When a monitor is connected to the front panel, the video connection does not
pass through to the rear panel, and an OSCAR message displays stating that the rear panel KVM and ACI connections
are disabled. If the monitor is disabled (that is, removed from the front panel or disabled by a CMC command), the ACI
connection becomes active while the rear panel KVM remains disabled.
Related Links

iKVM Connection Precedences
Enabling or Disabling Access to iKVM from Front Panel

Preemption Warning

Normally, a user connected to a server console through the iKVM and another user connected to the same server
console through the iDRAC Web interface console redirection feature both have access to the console and are able to
type simultaneously.
To prevent this scenario, before starting the iDRAC Web interface console redirection, the remote user can disable the
local console in the iDRAC Web interface. The local iKVM user sees an OSCAR message that the connection is
preempted in a specified amount of time. The local user should finish using the console before the iKVM connection to
the server is terminated.
There is no preemption feature available to the iKVM user.

NOTE: If a remote iDRAC user has disabled the local video for a specific server, that server's video, keyboard and
mouse is unavailable to the iKVM. The server state is marked with a yellow dot in the OSCAR menu to indicate that
it is locked or unavailable for local use see

Viewing Server Status

.

Related Links

Viewing Server Status

192

Advertising