Dell XPS 14Z (L412Z, Late 2011) - Manual (Page 23)

Wireless Mini-Card 23
CAUTION: When the Mini-Card is not in the computer, store it in protective
antistatic packaging. For more information, see "Protecting Against Electrostatic
Discharge" in the safety information that shipped with your computer.
Replacing the Mini-Card
1 Follow the instructions in "Before You Begin" on page 7.
2 Remove the new Mini-Card from its packaging.
CAUTION: Use firm and even pressure to slide the Mini-Card into place. If you
use excessive force, you may damage the connector.
CAUTION: The connectors are keyed to ensure correct insertion. If you feel
resistance, check the connectors on the Mini-Card and on the system board, and
realign the Mini-Card.
CAUTION: To avoid damage to the Mini-Card, never place cables under the
Mini-Card.
book.book Page 23 Thursday, May 3, 2012 3:09 PM