Replacing the power-button board – Dell XPS 14Z (L412Z, Late 2011) User Manual
Page 52
Advertising
52
Power-Button Board
Replacing the Power-Button Board
1 Follow the instructions in "Before You Begin" on page 7.
2 Use the alignment posts to place the power-button board on the palm-rest
assembly.
3 Replace the two screws that secure the power-button board to the
palm-rest assembly.
4 Replace the system board (see "Replacing the System Board" on page 48).
CAUTION:
Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
1
power-button board
2
screws (2)
2
1
book.book Page 52 Thursday, May 3, 2012 3:09 PM
Advertising