Dell Precision T5400 (Late 2007) User Manual
Page 186
Advertising
186
Adding and Replacing Parts
NOTICE:
If you are not installing a processor upgrade kit from Dell, reuse the
original heat-sink assembly when you replace the processor.
If you installed a processor replacement kit from Dell, return the original
heat-sink assembly and processor to Dell in the same package in which
your replacement kit was sent.
13 Install the heat-sink assembly:
a
Place the heat-sink assembly back onto the heat-sink assembly
bracket.
b
Rotate the heat-sink assembly down towards the computer base and
tighten the four capture screws.
NOTICE:
Ensure that the heat-sink assembly is correctly seated and secure.
14 Close the processor access door.
1
heat-sink assembly
2
captive screw housing (4)
1
2
Advertising