Changing between tower and desktop modes – Dell Precision T5400 (Late 2007) User Manual
Page 30
30
About Your Computer
Changing Between Tower and Desktop Modes
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the
Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from
the electrical outlet before opening the cover.
NOTICE:
To prevent static damage to components inside your computer, discharge
static electricity from your body before you touch any of your computer’s electronic
components. You can do so by touching an unpainted metal surface on the
computer.
NOTICE:
To avoid damage to a drive, do not set it on a hard surface. Instead, set
the drive on a surface, such as a foam pad, that will sufficiently cushion it.
NOTE:
To change your computer’s orientation from either tower to desktop or
desktop to tower, you must use an optional kit available from Dell. See "Product
Information" on page 291 for more details on ordering from Dell.
With the purchase of an optional kit from Dell, you can change the
configuration of your Dell Precision computer between desktop and tower
modes.
NOTE:
The tower configuration supports a third SAS or SATA hard drive in the
FlexBay. The desktop configuration only supports a third SATA drive.