Dell Dimension 2350 - Manual (Page 90)

90 Adding Parts
www
.dell.com | support.dell.com
Replacing the Computer Cover
1 Ensure that all cables are connected, and fold cables out of the way. Also, ensure that
cables are not routed over the drive cage—they can prevent the cover from closing
properly.
2 Ensure that no tools or extra parts are left inside the computer.
3 Place the cover on the computer.
4 Slide the cover towards the front of the computer until it fits completely into place.
5 If your computer has a computer cover thumbscrew, tighten the thumbscrew.
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then
plug it into the computer.
6 Connect your computer and devices to electrical outlets and turn them on.