Char-Griller 2123 - Manual (Page 3)

OM2123 A ™ & © Char-Griller / A&J Mfg. 3
ASSEMBLY INSTRUCTIONS
Read all safety warnings and instructions carefully before
assembling and operating your grill.
IMPORTANT HINT: DO NOT TIGHTEN ANY NUTS AND BOLTS UNTIL
GRILL IS FULLY ASSEMBLED.
1. Assembly requires 2 people. Get another person to Help. For easiest assembly
use a HAMMER, PLIERS and a 7/16" NUT DRIVER. NOTE: Do Not tighten any
bolts unless instructed to do so. Tightening too soon may prohibit parts from Fit-
ting together. All Hex Nuts should be on the Inside of the grill unless stated oth-
erwise. Unpack all contents in a well-cleared and padded area.
2. Insert one LONG LEG and one SHORT LEG into the CROSSBAR. See below. Re-
peat this step for the other LONG and SHORT LEG.
3. Attach LEG BRACES to the outside of one of the LONG and SHORT LEG assemblies
you just made. See below. Use two 1 3 / 4 " hex bolts and nuts for each LEG BRACE
but only finger tight.
Short Leg
Long Leg
Crossbar
Leg Braces