ClearSounds PHONE A1600 - Manual (Page 50)

50 – ENGLISH
█
Handset Name
This feature allows you to give each registered handset a name
in order to easily recognize each handset if you have more than
one registered to the base. To set the handset name:
1. Press under the word Menu on the screen to display
the main menu list.
2. Press up or down to scroll to HS Settings and then
press under the word Select.
3. Press up or down to scroll to HS Name and then
press under the word Select.
4. Enter the handset name (up to 9 characters) by using
the keypad (see page 71 for the character map and
instructions) and then press under the word Save to
confirm and exit. The handset name will be displayed
above your handset number in standby mode.
Note : If you make a mistake while entering the name, press
under the word Erase to correct it. Each time you press
this key, the last character is deleted.
█
Delete/Terminate Handset
This function allows you to delete a handset that is registered
to the base. To delete/terminate a handset:
1. Press under the word Menu on the screen to display
the main menu list.
2. Press up or down to scroll to BS Settings and then
press under the word Select.
3. Press under the word Select to select Delete HS.
The display will show PIN?
4. Enter the PIN (the default PIN is 0000) and then
press under the word Select. If the PIN is validated,
you will see a list of registered handsets.
5. Press up or down to scroll to the desired handset
that you would like to delete and press under the
word Select. The selected handset will no longer be
registered to the base.