ClearSounds PHONE A1600 - Manual (Page 90)

90 – ENGLISH
Noise, Static, Interference while using the phone
1. A filter may be required for your home when you have DSL
service or live near radio towers.
2. Make sure the AC adapter is not plugged into the wall outlet
with other appliances.
3. Try relocating the phone to another location.
No numbers dialed when memory button is pressed
1. No number stored in that memory button.
(page 37-38, 65)
2. Make sure phone number was programmed and saved.
(page 37-38, 65)
3. Make sure programming is done in the correct dialing mode
(touch-tone or pulse).
Caller ID information does not show
1. Make sure you are subscribed to Caller ID service through
your local phone company.
2. Let the phone ring a couple of times as there may be a
delay in receiving the Caller ID information.
No Caller ID information while on a call
1. Make sure you service provides Caller ID information while
you are on a call. This is sometimes known as “Caller ID on
Call Waiting” or “Type II Caller ID”.
2. The phone cannot display the information if another phone
on the same line is in use.
Answering Machine Tips
1. If you can’t hear the messages, or button tones, adjust the
volume (page 83).
2. If the system always plays Announce2, the message
memory may be full. Erase some messages.
3. If the incoming messages are incomplete, the message
memory is full. Erase some messages.