ClearSounds PHONE A1600 - Manual (Page 72)

72 – ENGLISH
█
Adding Phonebook Entries
1. Press under the word Menu on the screen to display
the main menu list.
2. Press down to choose Phonebook and then press
under the word Select.
3. The display shows the first entry already in the Phonebook.
4. Press under the word Select and the display shows
“Add”. Press under the word Select.
5. The display shows “Name?”. Enter the name you want to
use and then press under the word Save. The display
shows “Number?”. Enter the desired number (up to 24
digits) and then press under the word Save.
6. Press up or down to select from Melody 1 – Melody
10 and then press under the word Select. If you want
to set a VIP number, you should select a special Melody
ring tone for it. This ring tone should be different than the
EXT Ring tone you have set.
7. Repeat if necessary.
Note : If you make a mistake while entering a name or a
number, press under the word Erase to correct it. Each time
you press this key, the last digit is deleted. To clear all digits,
press and hold under the word Erase.
█
Using a Pause
(used when entering a phonebook entry or M1-M4 memory
dial entry) You can insert one 3 second pause into dialing or
memory storage in order to access custom and telebanking
services, long distance, calling cards, etc. Press right on
the navigation key at the desired point in the number to insert
the pause and the letter P will appear at the pause entry.
█
Viewing Phonebook Entries
1. In standby mode, press down to enter the phonebook.
2. Press up or down to scroll through the list until
the desired entry is displayed.