Compaq PROLIANT ML350 - Manual (Page 34)

Removal and Replacement Procedures
2-20 Compaq ProLiant ML350 Generation 3 Server Maintenance and Service Guide
COMPAQ CONFIDENTIAL Codename: Steel Dragon 2.4 Part Number: 278704-002 Last Saved On: 12/18/02 9:43 AM
Hot-Plug Hard Drive Blank
NOTE: The server does not need to be powered off to complete this operation.
To remove a hot-plug hard drive blank:
1. Open the bezel door. Refer to “Bezel Door” earlier in this chapter.
2. Slide the release latch to the left (1), and then pull the hot-plug drive blank out of the
drive bay (2).
1
2
Figure 2-17: Removing a hot-plug hard drive blank
To replace a hot-plug hard drive blank, reverse steps 1 and 2.