Cadillac 2006 STS - Manual (Page 65)

To use the coordinates destination entry method, do the
following:
1. Touch N or S next to LAT. to enter the direction of
the latitude coordinate.
2. Input the numeric portion of the latitude coordinate
using the keypad.
3. Touch E or W next to LONG. to enter the direction
of the longitude coordinate.
4. Input the numeric portion of the longitude coordinate
using the keypad.
5. Once both coordinates are entered, touch the OK
screen button.
A map screen will then appear with the destination
marked.
6. Select the
h
(destination) symbol screen button to
calculate the route.
7. Select the Guide screen button to start route
guidance.
See “Getting Started on Your Route” later in this
section for more information.
Preset Destination
j (Preset Destination): The preset destination entry
method allows you to set a destination by choosing from
one of five previously stored destinations. Besides home,
these are the only destinations available to set while the
vehicle is moving or by voice recognition. If a destination
is not set for one of the screen buttons, the button will be
dimmed and will not be available. See “Memory Points”
under Navigation Menu on page 2-16 for more
information.
To use the preset destination entry method, do the
following:
1. Select the desired preset destination from the
DESTINATION ENTRY screen. The screen buttons
are numbered 1 - 5.
A map screen will appear with the destination marked
and the number of the preset destination.
2-51