Cadillac 2006 STS - Manual (Page 97)

M
(Load): To load one disc, do the following:
1. Press the load hard key and follow the screen
message displayed.
2. Select the slot number, 1–6, to load the disc into.
If a slot is not selected, the system will load the
first available slot.
3. When the screen displays “Insert Disc (number)”,
insert the disc partway into the slot, label side up.
The system will pull it in and start playing.
The system will display the type of disc inserted,
DVD - Video,
B
Audio for CD/DTS, MP3 for
MP3 CDs, or DVD - Audio.
To load multiple discs, do the following:
1. Press and hold the load hard key.
2. When the screen displays “Insert Disc (number)”,
load the disc partway into the slot, label side up.
The system will pull it in.
3. Once a CD is loaded, the system will display “Insert
Disc (number)” again. Load the next disc. Repeat
this procedure for each disc. The player takes up to
six disc(s), do not try to load more than six. The
system will not display the disc types when loading
all, until the discs have been read by the system.
Once all discs have been inserted, the system will
start playing the last loaded disc.
If no CD or DVD is loaded in the CD/DVD changer
and you press the SRCE hard key a “No disc loaded”
error message will be displayed.
Select the Cancel screen button, when available,
to stop the loading process and to start playing the
last loaded disc.
Z (Eject): To eject a disc, do the following:
1. Press the eject hard key.
2. Select the slot number, 1–6, to eject the disc.
3. The system will display “Ejecting Disc” and then
eject the disc.
If a selection is not made, the system will eject the
disc from the current slot. If the disc is not removed
from the slot, the system will pull it back in after
10 seconds and start playing it.
To eject all discs at once, press and hold the eject
hard key. The system will display the disc number
being ejected.
3-13