Pro-Tools MB-105 - Manual (Page 5)

PAGE5
QUALITY PRODUCTS BY PEOPLE WHO CARE (813) 986-9000
ASSEMBLY INSTRUCTIONS
TIGHTEN LOCKDOWN BOLT SO TUBE
WILL NOT SLIP. BE CAREFUL NOT TO
OVER-TIGHTEN & DAMAGE TUBE.
RADIUS OF MAIN DIE MUST BE
CLEAN. ABSOLUTELY NO GREASE!
FOR A FRICTION-FREE BEND,
ALWAYS LUBRICATE THE BACKING
BLOCK. ALL PURPOSE WHEEL
BEARING GREASE WORKS VERY WELL.
BACKING BLOCKS WILL VARY IN SHAPE & DESIGN.
THE BLOCK SHOWN ABOVE IS JUST ONE EXAMPLE.
NOTE:
YOUR BACKING BLOCK HAS “TOP” STAMPED
ON IT. THIS MUST ALWAYS FACE UP.
PIVOT POINT
PIVOT POINT
PIVOT POINT
PIVOT POINT
LUBRICATE ALL PIVOT POINTS TO PREVENT EXCESS WEAR
AND TO INCREASE EASE OF BENDING.