Roadi RDT55 - Manual (Page 19)

OWNER S MANUAL
,
OBD2 CODE SCANNER
17
OBDII/EOBD Diag.
======================================
===================================
9). Use the
UP/DOWN scroll buttons to select Read Codes from the menu
and press the
Y button.
If there are no Diagnostic Trouble Codes present, the display will indicate
NO CODES ARE STORED IN THE MODULE!”
If there are any Diagnostic Trouble Codes present, the Fault Codes and
Pending Codes will be reported on the display.
1) Read Codes
2) Erase Codes
3) Live Data
4) Freeze Frame
5) I/M Readiness
6) Vehicle Info.
P0118 Pd 06/06
ISO9141 $09
Pressure Control
Solenoid A Control
Circuit Low
The DTC number will appear on the upper left hand corner and its definition
will show on the body of screen.
The type of code (Generic or Manufacturer specific), the vehicle protocol,
the sequence of the DTC currently being observed. The total number of codes
detected and the module ID will be observed on the upper rig ht hand corner
of the display.
If the code being displayed is a pending code the
Pd icon will be observed
next to the DTC number on the upper rig ht hand corner of the display.
When a DTC's definition covers more than one display screen use the
Y
button, as necessary, to view any additional information.
If the retrieved DTCs contain any manufacturer specific or enhanced codes
you will be prompted to refer to the CD DTC library or the vehicle service
manual to view the DTC definitions.
10). If more than are DTC is found, use the
UP/DOWN scroll buttons, as
necessary, until all the codes have been shown up.