Roadi RDT55 - Manual (Page 20)

OWNER S MANUAL
,
OBD2 CODE SCANNER
18
Erasing Codes
1). If you decide to erase the DTCs, use the
UP/DWON scroll buttons to
select
Erase Codes from the OBDII/EOBD Diag menu and press the Y
button.
If the scan tool is not connected or no communication is established with
the vehicle yet, then refer to Reading Codes from 1 to 8 at Paragraph 3.2.
2). A warning message comes up asking for your confirmation.
OBDII/EOBD Diag.
Erase Codes
======================================
======================================
1) Read Codes
2) Erase Codes
3) Live Data
4) Freeze Frame
5) I/M Readiness
6) Vehicle Info.
Erase trouble codes!
Are you sure?
YES <NO >
3). If you do not want to proceed with erasing the codes, press the
N button
to exit. A message of
"command cancelled" will show up.
4). If you do wish to proceed to erase the codes, then press the
Y button.
5). If the codes are cleared successfully, an
"ERASE DONE!" confirmation
will show on the display. Press any button to return to previous menu.
6). If the codes are not cleared, then an
"ERASE FAILURE!"”message will
appear. Press the
N button to return to previous menu.
Live Data
The Live Data function allows viewing of live or real time PID
data of vehicle’s computer module(s).
1). To view live data, use
UP/DOWN scroll button to select Live Data and
press
ENTER button.