Roadi RDT55 - Manual (Page 23)

OWNER S MANUAL
,
OBD2 CODE SCANNER
21
A. Since DTCs Cleared - indicates status of the monitors since the
DTCs are erased.
B. This Drive Cycle - indicates status of monitors since the beginning of the
current drive cycle.
An I/M Readiness Status result of NO does not necessarily indicate that
the vehicle being tested will fail the state I/M inspection. For some states,
one or more such monitors may be allowed to be "Not Ready" to pass the
emissions inspection.
OK -- Indicates that a particular monitor being checked has completed its
diagnostic testing.
INC -- Indicates that a particular monitor being checked has not completed
its diagnostic testing.
N/A -- The monitor is not supported on that vehicle.
1). Use
UP/DOWN scroll button to select I/M Readiness, press ENTER
button.
Diagnostic Menu
=========================
2). Wait a few seconds while the scan tool validates the PID MAP.
1) Read Codes
2) Erase Codes
3) Live Data
4) View Freeze Frame
5) I/M Readiness
6) Vehicle Info.
I/M Readiness
============================
I/M Readiness
============================
Reading PID…
- Please Wait -
3). If the vehicle supports both types of tests, then both types will be
shown on the screen for selection.
Since DTCs Cleared
This Drive Cycle