Chicago Electric Battery Charger with LCD Display 65834 - Manual (Page 10)

SKU 65834 For technical questions, please call 1-800-444-3353. Page 10
(RED with +) Battery Clamp from the
positive (+ or P) terminal of the bat-
tery.
Replace the battery caps on the bat-
3.
tery.
mAInTEnAnCE AnD
SERVICInG
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
TO PREVEnT
SERIOuS InJuRY
FROm ACCIDEnTAL
OPERATIOn OR PRODuCT
FAILuRE:
unplug the Power Cord from
its electrical outlet before
performing any inspection,
maintenance, or cleaning
procedures.
Do not use damaged
equipment. If abnormal noise,
heat, or vibration occurs have
the problem corrected before
further use.
Inspection, maintenance, and
Cleaning
BEFORE EACH USE, inspect the 1.
general condition of the Battery
Charger and its accessories. Check
for cracked or broken parts, damaged
electrical wiring, and any other condi-
tion that may affect its safe operation.
AFTER USE,
3. clean the surface of
the Battery Charger periodically with
aclean, soft cloth for best perfor-
mance. Do not use solvents, acid, or
alkali products.
WARnInG! If the Power Cord is
4.
damaged, it must be replaced only
by a qualified service technician.
PLEASE READ THE
FOLLOWInG CAREFuLLY
THE MANUFACTURER AND/OR
DISTRIBUTOR HAS PROVIDED THE
PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS MANUAL AS A REFERENCE
TOOL ONLY. NEITHER THE
MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION
OR WARRANTY OF ANY KIND TO
THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS
TO THE PRODUCT, OR THAT HE OR
SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN
FACT, THE MANUFACTURER AND/
OR DISTRIBUTOR ExPRESSLY
STATES THAT ALL REPAIRS AND
PARTS REPLACEMENTS SHOULD
BE UNDERTAKEN BY CERTIFIED
AND LICENSED TECHNICIANS, AND
NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS
TO THE ORIGINAL PRODUCT OR
REPLACEMENT PARTS THERETO,
OR ARISING OUT OF HIS OR HER
INSTALLATION OF REPLACEMENT
PARTS THERETO.