Chicago Electric Battery Charger with LCD Display 65834 User Manual

Page 8

Advertising
background image

SKU 65834

For technical questions, please call 1-800-444-3353.

Page 8

If the battery

3.

is not 6 volt or 12 volt,

or the battery is damaged, the LCD

will display “E03”.

(See Below.)

Battery Status

If the battery

1.

is not connected, the

LCD will display the following:

(See Below.)

If the battery

2.

is connected, the LCD

will display the following:

(See Below.)

If the battery

3.

is fully charged, the LCD

will display the following:

(See next illustration.)

If the battery is in the process of

4.

charging, the LCD will display the fol-

lowing:

(See Below.)

Sound Alarms:

A

1.

continuous “beep” indicates wrong

polarity, disconnection during charg-

ing, wrong type of battery, dead or

improper battery connection.
A

2.

short “beep” occurs each time a

button is pressed.
A

3.

short “beep” occurs when connect-

ing or disconnecting the battery.

The Charging Process:

Remove the battery caps from the

1.

vehicle’s battery to allow any excess

gas to escape and prevent bursting of

the battery.
Check and top off the battery’s liquid.

2.

When the battery being charged is in

3.

the vehicle, verify that the ignition is

off.

Connect the positive

(RED with +) Battery Clamp to the

Advertising