Tomei Powered 3.692 FINAL GEAR SET (R34) - Manual (Page 11)

FRONT LEFT SIDE BEARING PRELOAD ADJUSTMENT SHIMS
REAR SIDE ADJUSTMENT BEARING SHIMS
・Verify the tooth contact pattern……Adjust the thickness of the pinion shim height.
FRONT Drive Pinion Adjust Shims
REAR PINION HEIGHT ADJUSTMENT SHIMS
1.61
38453-03V00
2.53~2.57
2.48~2.52
2.43~2.47
Thickness (mm)
38453-03V01
38453-03V02
38453-03V07
1.19
1.13
1.10
Thickness (mm)
1.07
1.04
1.01
Thickness (mm)
1.16
1.31
1.28
1.25
1.22
2.63~2.67
2.58~2.62
1.43
1.40
1.37
Thickness (mm)
38453-03V05 2.18~2.22
Thickness (mm)
2.00
1.97
1.94
1.91
1.88
1.82
1.79
1.76
1.73
Thickness (mm)
3.15
3.12
3.09
1.34
38453-03V03 38453-03V08
Thickness (mm)
3.27
3.24
3.21
3.18
Part No. Part No.
2.13~2.17
2.08~2.12
2.03~2.07
1.98~2.02
1.93~1.97
38453-03V06
2.28~2.32
2.23~2.27
38453-15U63
38453-15U62
38453-15U24
2.38~2.42
2.33~2.37
38453-15U67
38453-15U60
38453-15U61
38453-15U66
1.85
Part No.
38453-03V10
38453-03V12
Part No.
38453-03V13
38453-03V14
38453-03V11
38453-03V04 38453-03V09
3.66
Thickness (mm)
Part No.
38453-15U00 38453-15U12
Part No.
38453-15U01 38453-15U13
38453-15U02 38453-15U14
38453-15U03
38453-15U04
38453-15U16
38453-15U15
38453-15U05 38453-15U17
1.46
1.52
1.49
38453-15U06 38453-15U18
38453-15U64
38453-15U65
1.58
1.55
38453-15U07
38453-15U08
38453-15U20
38453-15U19
38453-15U68
38453-15U10 38453-15U22
38453-15U09 38453-15U21
1.67
1.64
38453-15U11 38453-15U23
3.30
Part No. Thickness (mm) Thickness (mm) Part No. Part No.
1.70
3.36
38154-U1500 38154-U1507 38154-U1514
3.57
3.33
3.51
38154-U1519
38154-U1501 38154-U1508
38154-U1517
38154-U1502 38154-U1509
38154-U1515
38154-U1516 3.54
3.39
38154-U1518
38154-U1503
38154-U1504
38154-U1511
38154-U1510
3.42 3.63
3.60
Thickness (mm) Part No. Part No. Thickness (mm)
38154-U1505 38154-U1512
38154-U1506
Part No.
38154-U1513 3.48
3.45
11
Chang the pinion height washer thickness to change the pinion position, will also change the backlash
setting as well. When you adjust the side bearing shims & pinion height adjustment washers, for setting the
preload and backlash please also check the gearing teeth alignment again.
8. Apply the liquid silicon gasket to the carrier cover before sealing it.
9. Fit the final drive assembly to the vehicle and fill with the appropriate LSD differential gear oil,
up to the filler plug.
2. INSTALLATION VERIFICATION
Please verify that there are no signs of oil leaks from the diff housing and or car.
3.66
3.63
3.60
3.57
3.54
38154-P6020 3.39
3.51
Thickness (mm) Thickness (mm)
3.09 38154-P6024
Part No.
38154-P6017
Part No. Thickness (mm)
3.30
38154-P6034
38154-P6032
Part No.
38154-P6031
38154-P6033
3.12
38154-P6019
38154-P6018
3.18 38154-P6027
38154-P6025
3.36
3.33
38154-P6029 38154-P6022 3.45 3.24
3.15 38154-P6026
3.42 3.21 38154-P6028 38154-P6035
38154-P6030 3.27 38154-P6023 3.48
38154-P6036
38154-P6021
Heel Contact Point Face Contact Point
The Drive Pinion is brought closer to the ring
Flank Contact Point Toe Contact Point
Crown ring & Pinion Gear is further apart.
11