Cadence Mar06 - Manual (Page 9)

Mar06 Digital 661Telephone User Guide 13
Features
Cancel Follow Me from
Answer Point
• Lift
handset
• Press
• Dial your extension
• Press
• Listen for pulsating dial tone
• Hang up
Your Phone
• Lift handset at current answer point
• Press
• Listen for normal dial tone
• Hang up
Note: Stuttered dial tone will remind the user that calls are diverted.
SPEED REDIAL (Off-campus calls only)
This Speed Redial feature will redial the last off-campus number called.
To use speed dial
• Press
EXTERNAL NUMBER REDIAL
Like the Speed Redial feature, The External Number Redial (ENR) feature will dial an off-
campus number. The difference is that you will choose the number to save.
To save a number using External Number Redial
• Dial an off-campus number
• Press the ENR function key to save the number
To use the External Number Redial function key
•
Press the ENR key to dial the number
• The number will be dialed automatically
Depressing this key when dialing will recall the stored number and dial automatically
TELEPHONE NUMBER STORE (TNS)
TNS keys may be programmed to store key sequences up to 20 keystrokes.
To store number
• Press
• Press vacant TNS key
Lamp is on
• Enter the number (+ 9 if off-campus)
• Press TNS key
Lamp is off
• Press
Lamp is off
To use a stored number
•
Press the TNS key
• Number is automatically dialed
Mar06 Digital 661Telephone User Guide 6
Menu and Function Keys (F1 – F4)
Enter the auth code. This feature allows you to use an auth code to override
the phones current class of service.
ENTER AUTH CODE
CLEAR DEL ENTER
F1 F2 F3 F4
CLEAR Press F1 to erase all the digits entered for the auth code
DEL Press F2 to erase the last digit entered for the auth code
ENTER Press F4 to exit the current menu
Toggle the display between the date display and the timer. The timer feature
will display the time since the timer was started by pressing F1.
START RST DATE EXIT
F1 F2 F3 F4
START Starts the timer. While running STOP is displayed in the F1
position. To stop the timer, press F1 again.
RST Press F2 to reset the timer to 0. Press F1 to start it again.
DATE Toggles display between the date and the timer function
EXIT Press F4 to exit the current menu