Tri-Tronics G2 Tri-Tronics® Beeper - Manual (Page 5)

Beeper Control Button
• Upland G2 and Upland G2 EXP: The rubber-covered button in the center
of the back side of the transmitter.
• Sport ® 65 BPR G2: The small orange button.
• Sport Upland™ G3: The upper button marked BP.
• G2 and G2 EXP Field or Pro Series model other than the Upland models:
Any button, including the “tone” button, will operate the Beeper provided
the intensity dial is set on “A.”
Introducing an Inexperienced Dog to the Beeper
The Beeper is loud. It can startle or alarm an inexperienced dog at first. If your
dog isn't used to beeper collars, begin hunting him with the Beeper set on low
volume instead of high volume. You can also muffle the sound by placing duct
tape over the horn, or a cotton ball in the horn. Another technique for getting
a dog used to beeper collars is to hang a beeper at least 20 yards away from the
dog's kennel, and let him listen to it beeping for several hours before you put
it on him and hunt.
Care and Maintenance
Remove the Beeper from the collar strap for thorough cleaning. You can wipe
the Beeper with a damp cloth and mild detergent if desired. Do not use any
solvents as they can cause damage. Do not submerge the Beeper when cleaning it.
Dirt and debris can cause the Beeper sound to change. To clean debris from the
Beeper horn, use only a moistened cotton swab. Do not use any sharp or pointed
objects or damage to the horn may result.
Service and Warranty
If you purchased an Accessory Beeper, your Beeper is covered by a 1-year
warranty from Tri-Tronics.
If you purchased an Upland G2 or Upland G2 EXP, Sport Upland™ G3, or
Sport
® 65 BPR G2, your Beeper is covered by a 2-year warranty from Tri-Tronics.
The warranty does not cover physical damage or abuse, and is void if the Beeper
has been altered or unauthorized work has been attempted. If you send your
Beeper in for repair we
may replace it with a
reconditioned unit.
If you suspect that your
Beeper is malfunctioning,
please check the
Troubleshooting Guide.
If this does not resolve
the problem, please
contact our Customer
Service Department at
[email protected]
or 1-800-456-4343.
Always call our Customer
Service Department
before sending your unit
in for repair.