Using the plastic pen – Sony PCG-505GX User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VAIO MicroNotebook Computer User Guide
Using the Plastic Pen
The plastic pen, located in the vinyl bag with your
Getting Started
manual,
can be used on the touchpad for drawing or for signing your name with
the ScribblePad software. You can store the pen in the pen compartment
on the left side of the LCD screen.
To use the pen compartment
1
Press the bottom of the pen compartment to open the compartment.
2
Slide the pen in or out of the compartment to store or remove it.
3
When you are ready to close the pen compartment, press the top of
the compartment until it clicks into place.
The supplied plastic pen is designed to be used only on the touchpad. Do not use this pen
on any surface other than the touchpad including the computer's LCD; it may damage the
LCD.
Store the pen in the pen compartment when you are not using it.