Mounting the base unit on a wall – Sony SPP-SS961 User Manual
Page 64
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Additional Information
Mounting the base unit on a wall
1
-Telephone
line cord
Wall
bracket
Reverse the hang-up tab.
Plug the telephone line cord to
the LINE jack and the AC power-
adaptor to the DC IN 9V jack,
and hook the cords. Use the
shorter cord for mounting.
Attach the wall bracket to the
center of the base unit.
Align the A marks of the wall
bracket with those of the base
unit.
Plug the telephone line cord to
the telephone outlet, and hook
the base unit to the wall plate.
Plug the AC power adaptor to
an AC outlet. Then raise the
antenna so that it points
towards the ceiling.
Telephone
line cord
AC ciutlet
AC power
adaptor
Tip
To remove the wall bracket, press the lower tabs.
Additional Information