Notes – Sony KV-27V22 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting two VCRs for tape
editing using MONITOR OUT
• KV-27V22, 29V22M only
MONITOR OUT gives you the ability to use a
second VCR to record a program being played
by the primary VCR or to perform tape
editing and dubbing.
1
Connect the VCR intended for playback
using the setup instructions on page 3 of
this manual.
2
Using AUDIO/VIDEO connectors,
connect AUDIO and VIDEO IN on your
VCR intended for recording to MONITOR
AUDIO and VIDEO OUT on your TV.
Disconnect all power sources before making any connections.
(Rear of TV)
Notes:
• Do not change the input signal while
editing through MONITOR OUT.
• When connecting a single VCR to the TV; if
VCR LINE OUT is connected to TV VIDEO
IN, do not connect the TV MONITOR OUT
jacks to the VCR LINE INPUT (see right).
Doing so will cause program interference
and other viewing problems.
Indicates direction
of signal