Notes – Sony KV-27V22 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DISPLAY
Press repeatedly to step through available displays:
Status
Channel number, current time, channel caption (if set), and MTS mode (if
SAP is selected) are displayed. SAP indication disappears after three
seconds.
XDS
XDS (Extended Data Service) shows a network name, program name,
program type, program length, call letters, and time of the show if the
broadcaster offers this service.
Caption Vision
Caption Vision will be displayed on the screen if the broadcaster offers this
service, (see right)
To cancel the display, press DISPLAY repeatedly until “DISPLAY OFF”
appears. “DISPLAY OFF” disappears after three seconds.
TV/VIDEO
Press repeatedly to step through available video inputs:
TV and Video 1 (KV-27S22, 29PS2, 29RS22, 29RS22C, 29SD2, 32S22
only)
TV, Video 1 and Video 2 (KV-27V22, 29V22M only)
ANT
Press to change the input from VIDEO to regular (ANT) mode.
MTS/GUIDE
Press this button to cycle through the Multi-channel TV Sound (MTS) options.
(page 14)
CAPTION
VISION
CAPTION VISION
►CO 1
TEXT 1
TEXT 2
TEXTS
TEXT 4
DMENU
gfflCB
Exit
Some programs are broadcast with Caption
Vision. To display Caption Vision, select either
CC1. CC2, CC3, CC4, TEXT1, TEXT2, TEXT3,
or TEXT4 from the menu, then press DISPLAY
until Caption Vision is displayed,
CC1, CC2, CC3, or CC4 shows you a caption,
that is, a printed version of the dialogue or
sound effects of a program. (The mode should
be set to CC1 for most programs) TEXT 1,
TEXT2, TEXT3, or TEXT4 shows you text, that
is, information presented using either half or the
whole screen. It is not usually related to the
program.
Notes:
• Poor reception of TV programs can cause
errors in Caption Vision and XDS.
Captions may appear with a white box or
other errors instead of intended text.
• XDS, Caption Vision, and the status display
cannot be used at the same time.
11