Step 2, Setting up the remote commander, Inserting the batteries – Sony SLV-662HF User Manual
Page 5: Using the remote commander, Set [tv/[videb: to, Notes, Continued, Step 2 setting up the remote commander
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 2
Setting up the remote commander
Inserting the batteries
Insert two size AA (R6) batteries by
matching the + and - on the
batteries to the diagram inside the
battery compartment.
Insert the negative (-) end first,
then push in and down until the
positive (+) end clicks into
position.
Using the remote commander
You can use this remote
commander to operate this VCR
and a Sony TV. Buttons on the
remote commander marked with
a dot (•) can be used to operate
your Sony TV.
Remote sensor
-------------
o
ms '^02'
—
To operate
Set [TV/[VIDEb: to
the VCR
[
video
] and point at the remote sensor on the VCR
a Sony TV
[
tv
] and point at the remote sensor on the TV
Notes
• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove
the batteries to avoid possible damage from battery leakage.
• Do not use a new battery with an old one.
• Do not use different types of batteries.
continued
Getting Started 5