Hookup 1, Q use this hookup if you're using, Antenna hookup – Sony SLV-662HF User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 3: Hookups (continued)
Hookup 1
Pages 10 to 12
Antenna hookup
Make the following connections if you're using an antenna (if you don't
have cable 'TV),
Q Use this hookup if you're using:
• VHF/UHF antenna (you get channels 2-13 and channels 14 and higher)
• UHF-only antenna (you get channels 14 and higher)
• Separate VHP and UHF antennas
Rear of TV
VHF/UHF
@ A
VHF
UHF
or
VHF
Match the type of
connector on your
TV: A, B, or C.
UHF
m
Use this hookup if you're using a VHF-only antenna (you get
channels 2-13 only)
VCR
Rear of TV
VHF/UHF
-----@ A
Match the type of
connector on your
TV: A, B, or C.
VHF
—^ B For connector types
B and C, no UHF
VHF
UHF
connection is
required.
If you cannot connect your antenna cable to the VCR directly
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external
antenna connector (not supplied) so you can connect the cable to the VHF/UHF IN
connector. If you have separate cables for VHF and UHF antermas, you should use a
U/V band mixer (not supplied). For details, see page 69.
10 Getting Started