Sony SLV-677HF - Manual (Page 16)

_______ VCR setup
1
step 3: Hookups (continued)
Hookup 4:
Set the RF UNIT switch to
CH 3 or CH 4, whichever
channel is not used in your
area. If both are used, set the
switch to either channel.
For details, see page 44. If
you made A/V connections
(page 8), you can skip this
step.
2
Set the A/B switch to "A."
3
Press EASY SET UP on the VCR.
O The LANGUAGE menu appears. Change the
on-screen display language to Spanish
(ESPAÑOL) or French (FRANÇAIS) if desired,
and press OK. For details, see page 17.
© The CLOCK SET menu appears. Set the clock
and press OK. For details, see page 18.
© The TUNER PRESET menu appears. Set
ANTENNA/CABLE to CABLE and press OK.
For details, see page 20.
O The AUTO PRESET
starts. SETUP
AUTO PRESET
PROCESSING
PLEASE WAIT -
SETUP
LANGUAGE
►ENGLISH
ESPAÑOL
FRANÇAIS
NEXT
CANCEL OK
EASY SET UP
SETUP
CLOCK SET
J-1 /1 998 TH 1 2 ; 00AM
NEXT
CANCEL OK
EASY SET UP
SET UP
TUNER PRESET
ANTENNA/CABLE
SELECT
NEXT
CANCEL
OK
EASY SET UP
SETUP
SET UP IS DONE
Normal display
Cable box output channel
Preset the cable box output channel (usually 2 ,
3 or 4). For details, see page 22.
O Press MENU and select TUNER PRESET.
© Enter the cable box output channel.
© Set MANUAL SET to ADD and press OK.
TUNER PRESET
ANTENNA/CABLE ANT»CABLE
AUTO PRESET
►MANUAL SET ADD ERASE
AFT ON OFF
FINE TUNING
Getting Started