Attaching the external antenna connector, Attaching a uhfa/hf band mixer, Ohm coaxial- cable – Sony SLV-677HF User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Attaching the external
antenna connector
when using a 300-ohm twin lead cable
for a VHP / UHF antenna, use the EAC-
32 antenna connector (not supplied) to
connect the antenna to the VCR.
300-ohm twin
lead cable
EAC-32 Antenna
connector (not
supplied)
1
Loosen the screws on the antenna connector.
2
Wind the twin leads around the screws on the antenna cormector.
3
Retighten the screws.
Attaching a UHFA/HF band
mixer
when using both a 75-ohm coaxial cable
and a 300-ohm twin lead cable for a
YHF/UHF antenna, use the E AC-66
UHF/VHF band separator/mixer (not
supplied) to connect the antenna to the
VCR.
300-ohm twin
lead cable
EAC-66
UHF/VHF
band
separator/
mixer (not
,|^ supplied)
75-ohm coaxial-
cable
1
Loosen the screws on the mixer.
2
Wind the twin leads around the screws on the mixer.
3
Retighten the screws.
4
Connect the 75-ohm coaxial cable to the mixer.
Additional Information