Sony SLV-677HF User Manual

Page 47

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Symptom

A TV program does not appear '
on the TV screen.

Remedy

• Make sure the TV is set to the channel for the VCR. If

you are using a monitor, set it to video input.

TV reception is poor.

Adjust the TV antenna.

oi

З

П '

w

o

(J

HI

cc

The tape starts playing as soon
as it is inserted.

• The safety tab has been removed. To record on this

tape, cover the tab hole.

The tape ejects when you press
• REC.

Check that the safety tab has not been removed.

Nothing happens when you
press 9 REC.

Make sure the tape is not at its end.
Select the correct source. Select a channel number wit
the CH + /- buttons when recording TV programs;
select “L" with the INPUT SELECT button when

recording from other equipment.

The timer does not operate.

c

o

U

OP

Q)

E

Check that the clock is set.
Make sure a tape has been inserted.
Check that the safety tab has not been removed.
Make sure the tape is not at its end.
Make sure a program has been set for timer recordin;
Make sure your timer settings have not already passi
the current time.
Check that the cable box is turned on.
The clock stops if the VCR is disconnected from the

wall outlet for more than one hour. Reset the clock e
timer.

A tape cannot be inserted.

• Check that a tape isn't already in the tape

compartment.

The remote commander does
not function.

• Make sure you are pointing the remote commander

, the remote sensor on the VCR.

• Replace all the batteries in the remote commander v

new ones if they are weak.

• Make sure the I TV |/| VIDEOl remote control switch

set correctly.

The tracking meter does not
appear on the screen.

• The recording condition of the tape is very poor am

tracking cannot be adjusted.

You cannot control other TVs.

» Set your TV's code number. The code number rese

01 when you replace the batteries of the remote
commander.

The VCR needs to be cleaned.

Clean the cabinet, panel and controls with a dry, so
cloth, or a soft cloth slightly moistened with a mild
detergent solution. Do not use any type of solvent
such as alcohol or benzine.

Additional Inform

Advertising
This manual is related to the following products: