Dolby surround sound, Selecting the center mode, Note – Sony STR-GX700ES User Manual

Page 24: Qo 0

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

I Chapter 4 Digital Sound Effects

Dolby Surround Sound

Many video tapes and laser discs available today are encoded with Dolby surround sound, which adds
theater-like sound to your viewing experience. To take advantage of Dolby surround sound, first select
the pre-programmed Dolby Surround sound field. To make the most out of the Dolby surround sound,
however, we recommend that you select the center mode and adjust the speaker volume based on your
speaker configuration. Also, if you have rear speakers, you can adjust the timing of the sound that comes

from the rear speakers (delay time).

Selecting the Center Mode

Since all speakers are different, the receiver offers you four
types of speaker configurations (Phantom, 3 Ch Logic,
Normal, Wide). To best fit your speaker system, you can
change how the sound comes from each speaker by selecting
one of fhese four configurations. Once you make the
adjustments, you do not have to adjust them again unless
you change your speaker system.

Each time you press the CENTER MODE button, the
CENTER MODE is changed in the following order:

■ PHANTOM ^ 3 CH LOGIC NORMAL WIDE

If you do not have a center speaker

♦ Select PHANTOM mode.

The sound of fhe center channel is output from the front
speakers.

Front speaker (L)

1 N

Front speaker (R)

f' 1

Q

o

0

Rear speaker(L)

Rear speaker(R)

If you have only front speakers and a center
speaker
♦ Select 3 CH (Channel) LOGIC mode.

The sound of the rear channel is output from the front
speakers.

Center speaker

Front speaker (L)

Front speaker (R)

If you have a small center speaker
♦ Select NORMAL mode.

The bass sound of the center channel is output from the
front speakers, because a small speaker cannot produce
enough bass.

If you have a medium to large center speaker

*

Select WIDE mode.

This is the best possible combination of the speakers.

Note
The Dolby Pro Logic Surround Decoder is a system to
decode the software carrying the nm°°'^8''suaRou~o| mark.

For optimum surround sound effect, place your speakers as
shoivn below.

24

45

Rear speaker

a

0

Advertising