Creating custom sound fields (continued), Understanding the surround sound parameters, Adjusting parameters – Sony STR-GX700ES User Manual
Page 28: Adjusting parameters other than the tone controls, If you store a new sound field effect, Even if the ac power cord is disconnected, Creating custom sound fields, Continued)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Creating Custom Sound Fields
(continued)
Understanding the Surround Sound
Parameters
This receiver uses digital signal processing to reproduce the
sound effects of various listening environments, such as a
concert hall. Three sound elements contribute to this effect;
direct sound, early reflection and reverberation. The
following diagrams show how each sound element work.
Adjusting Parameters
Once you create your own sound field, it is automatically
stored in memory, replacing the pre-programmed sound
field. However, you can always reset to the pre
programmed sound fields when you want to (page 29).
Adjusting parameters other than the tone controls
The adjustable parameters are different depending on the
sound field you select. Refer to "Adjustable Parameters" on
page 27.
Play back the program source, for example,
a CD.
Press SOUND FIELD to ON.
Press SOUND FIELD MODE to select the
sound field you want.
Press DPC MODE so that the SUR (surround)
indicator lights up.
Rotate the PARAMETER TONE LEVEL
CHARACTER knob to select the parameter
you want.
Adjust the parameter by rotating the LEVEL
BASS/TREBLE POSITION knob.
Alter adjusting, the settings are stored automatically.
28
If you store a new SOUND FIELD effect
The previous sound field efiect is replaced by the new one.
Even if the AC power cord is disconnected
The recei\’er retains the stored data for approximately 1
month.