Editing onto another tape, To edit more scenes, To stop editing – Sony CCD-TR66 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Editing onto Another Tape
You can create your own video program by editing with any other @ 8 mm, Hi@ Hi8,
Sffl VHS, SMS S-VHS, SBHVHSC, Siwag S-VHSC, ra Setamax or BjHiiil ED Betamax
VCR that has video/audio inputs.
After connecting the camcorder to the VCR,
(1)
Slide the POWER switch to PLAYER.
(
2
)
Insert a blank tape (or a tape you want to record over) into the recording VCR. Then
insert your recorded tape into the camcorder.
(3)
Play back the recorded tape on the camcorder until you locate the point where you
want to start editing. Then press
II
to set the camcorder to playback pause mode.
(4)
Set the recording VCR to recording pause mode.
(5)
Press
II
on the camcorder and then on the VCR to start editing.
o
■o
n
: Signal flow
To Edit More Scenes
Repeat steps 3 to 5.
To Stop Editing
Press ■ on the camcorder and VCR.
27