Resetting the date and time, To correct the date and time setting, To check the date and time – Sony CCD-TR66 User Manual
Page 30: The year indicator changes as foilows, Note on the time indicator
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Resetting the Date and Time
Reset the date and time using the DATE(+) and TIME(NEXT) buttons.
(1) Slide the POWER switch to CAMERA.
(2)
Turn STANDBY up.
(3)
Press DATE(+) and TIME(NEXT) simultaneously until the year indicator flashes in
the viewfinder.
(4)
Set year, month, day, time, minute by pressing DATE(+) and TIME(NEXT). Note
that when you keep DATE(+) pressed, the digits advance faster.
To Correct the Date and Time Setting
Repeat steps 3 and 4.
To Check the Date and Time
Press DATE(+) to display the date indicator in the viewfinder. Press TIME(NEXT) to
display the time indicator. When you press the same button again, the indicator goes
out.
The year indicator changes as foilows:
'96-
■'97
■’25
_J
Note on the time indicator
The internal clock of the camcorder operates on a 12-hour cycle.
12:00:00 AM stands for midnight.
12:00:00 PM stands for noon.
30