Camera recording, To stop recording momentarily [a, Standby mode). to finish recording [b – Sony CCD-TR400 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
o<i»iw wp«rduun>
Camera Recording
Make sure that a power source and a cassette is inserted. The date is automatically recorded for 10
seconds after you start recording (AUTO DATE feature). This feature works only once a day. You can
hear the beep sound to confirm your operation. Before you record one-time events, you may want to
make a trial recording to make sure that you are using the camcorder correctly.
(1) While pressing the small green button on the POWER switch, slide it to CAMERA.
(2) Turn STANDBY up.
(3) Press START/STOP. The camcorder starts recording and the "REC" indicator appears in the
viewfinder.
STBY
00000
AUTO DATE
REC
oooot
JUL 4 1994
To Stop Recording Momentarily [a]
Press START/STOP again. The "STBY" indicator appears in the viewfinder
(Standby mode).
To Finish Recording [b]
Press START/STOP. Turn STANDBY down, and set the POWER switch to OFF.
Then, eject the cassette (p.9).
Note on beep sound
As indicated with
in the illustrations, a beep sounds when you turn the power on or when you start
recording and two beeps sound when you stop recording, confirming the operation. Several beeps also
sound as a warning of any unusual condition of the camcorder (p.53). Note that the beep sound is not
recorded on the tape. If you do not want to hear the beep si>und, select "OFF" in the menu system
(p.26).