Inserting a cassette, To eject the cassette, To prevent accidental erasure – Sony CCD-TR400 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Inserting a Cassette
Make sure that a power source is installed. When you want to record in Hi8 system, use Hi8 video
cassette
Hi@.
(1) While sliding the lid lock, lift up the lid. Then open it.
(2) Press EJECT. The cassette compartment automatically lifts up and opens.
(3) Insert a cassette (not supplied) with the window facing out.
(4) Press the PUSH mark on the cassette comjjartment to close it. The cassette compartment
automatically goes down.
(5) Close the lid until it locks.
To Eject the Cassette
Press EJECT.
To Prevent Accidental Erasure
Slide the tab on the cassette to expose the red mark.
If you try to record with the red mark exposed, the ^ and ± indicators flash in the viewfinder, and
you cannot record on the tape. To re-record on this tape, slide the tab back out to cover the red mark.