Set the standby switch up, At the desired point, reiease editsearch, Press start/stop – Sony CCD-FX510 User Manual
Page 31: To pause recording, To stop recording
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Re-recording over a Previously Recorded Portion (EDITSEARCH)
You can re-shoot a scene over the last recorded portion using EDITSEARCH. The
previously recorded portion will be erased.
1
1,4
Set the STANDBY switch up.
Look in the viewfinder and find the point
where you want to begin recording:
Keep pressing the + side of EDITSEARCH
continuously to advance the picture at a normal
playback speed, or the - side to reverse the picture.
a
+ EDITSEARCH-©
At the desired point, reiease EDITSEARCH.
Press START/STOP.
Recording begins from the point where you released
EDITSEARCH.
A smooth transition between scenes can be made
after the pre-recorded portion even it the STANDBY
switch is turned down and turned up, or even if the
power is turned off and on again, provided that the
tape is not removed.
START«TOI>
To pause recording
Press START/STOP again.
To stop recording
Set the STANDBY switch down.
Advanced Camera Operation 31