Installing the battery pack – Sony CCD-FX510 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing the Battery Pack
When you have finished charging the battery, install the battery pack as follows:
1 With the arrow mark on the battery pack up, align the flat side of the battery pack with
the white line on the camcorder.
2 Push down and slide the battery pack in the direction of the arrow.
Notes
• Make sure the battery is securely installed so that it does not come loose. If the battery
is not installed properly, the camcorder does not work.
• You can use the AC power adaptor as a power source when recording indoors (see
page 25).
Removing the battery pack
Press the ВАТТ knob in the direction of the arrow, and at the same time, slide out the
battery pack to the left.
Getting Started