Sony RM-V40A - Manual (Page 4)

operating a Cable box
IT] To turn on and ott.
To set up the Commander
[3] To change the channel. For example, to
change to channel 5, press 0 and 5 (or,
press 5 and ENTER.)
[4] To switch to cable box operation. Set to the
position on which the cable box is assigned.
(CBL, AVI, or AV2/DBS)
To change the channel. For example, to
change to channel 5, press
5 and ENTER.
Channel up: +
Channel down: -
\7] To operate JUMP, FLASHBACK or
CHANNEL RETURN function on the TV
depeitding on the setting of the TV's
manufacturer.
Notes
• There may be cases you may turn on/off the
cable box by pressing the CH+ or CH-
buttons on the Commander.
• If your cable box can control volume, be sure
to set its volume control to a medium
position. If the volume on the cable box is
turned down completely, you will not be
able to adjust your TV's volume with the
Commander.
Operating a DBS tuner
m To turn on and off.
[2] To switch the output of the DBS receiver to
the TV. (When you connect a TV cable or
antenna to the receiver, the output switches
between a TV and DBS program.)
[3 To call up the MENU display.
[4 To scroll through the Master Guide.
[Z] To switch to DBS operation. Set to the
position on which the DBS is assigned.
(AV2/DBS, AVI, or CBL)
[6l To bring up the Station Index.
in To change the channel. For example, to
change to channel 5, press 0 and 5 (or press
5 and ENTER).
[8l To change the channel. For example, to
change to channel 5, press 5 and ENTER.
n To bring up the Master Guide.
fiOl To select the channel that's highlighted.
To bring up the Station Index when a
program guide is not displayed.
[Til Channel up: +
Channel down: -
To page through the guide when a program
guide is displayed.
53 To tune to the last tuned station.
Operating a Receiver
m To turn on and off.
[2] To set up the Commander.
[3] To select the input source:
1 selects VIDEO 1
2 selects VIDEO 2
3 selects AUX
4selects TUNER
5 selects CD
6 selects TAPE 1
Tselects TAPE 2
8 selects TV
9 selects PHONO
(0 switches to another input source by each
pressing).
l4l
Volume up: +
Volume down: -
js] To mute the volume on a receiver.
[Z1 To switch to Receiver operation. Set to the
position on which the Receiver is assigned.
(AVI, AV2/DBS, or CBL)
[71 Presetting frequency up: +,
down: -
Tuning frequency up: +,
down: -
[U To shift band (FM/AM).
Operating a CD player, an MD deck or a DAT deck
m To turn on and off.
[2l To set up the Commander.
[3] To select the track number. 0 selects track
10 .
To select track numbers above 10, see the
descriptions on the
DISP button below.
[ 4] To select numbers 10 and above.
For example, to select track 15, press DISP
and then press 5.
[ 5] To record, press ► while pressing •/ First
release ►, then release #. (MD and DAT
deck only)
IZ] To pause.
[71 To select the previous track.
[8] To stop.
[
9] To switch to CD, MD, or DAT operation.
Set to the position on which the desired
component is assigned.
(AV1, AV2/D6S, or
CBL)
53 To play.
55
] To select next track.
51
To select next disc. (CD player and MD
deck only)
Operating a tape deck
To set up the Commander.
To select the tape deck and direction:
1 selects Deck A (dual cassette deck only*).
2 selects Deck B(dual cassette deck only*).
0 functions as -4 REV button, or switches
play sides.
(The other buttons do not have assigned
functions)
To record, press ► while pressing •/First
release ►, then release •.
To pause.
To rewind.
To stop.
To switch to tape deck operation. Set to the
position on which the tape deck is
assigned.
(AV1, AV2/DBS, or CBL)
To play.
To fast-forward.
To select the tape deck: deck A or deck B
(dual cassette deck only**).
* If your deck's commander has two sets of
tape operating buttons and has no A/B
button for deck selection, use the numeric
buttons (1 and 2): button 1 selects Deck A,
and button 2 selects Deck B.
**If the deck's commander has one set of tape
operating buttons, and has an A/B button
for the deck section, use the
RECALL button
to select Deck A or B.
Troubleshooting
If you have problems setting up or using the Commander:
• When setting up the Commander, carefully go through the procedures
described in "Setting the Code." If the code that's listed first for your
component doesn't work, try all the codes for your component - in the order
in which they're listed. If all the codes fail to work (or if your component is
not listed in this manual), try using the procedures in "Searching for the
Correct Code."
• Check that you're aiming the Commander directly at the component, and that
there are no obstructions between the Commander and the component.
• Make sure the batteries you're using are not worn out, and that they're
inserted correctly.
• that the slide switch is set to the component you want to control.
• Check that the component has infrared remote capability. For example, if
your component didn't come with a remote commander, it probably isn't
capable of being controlled by a remote commander.
• If your video components are connected to an audio system, make sure
you've set up the Commander as described in "Controlling the Volume of
Video Components Connected to an Audio System."
• Should any problem persist, reset the Commander to the factory setting by
pressing the POWER, TV/VIDEO and VOL- buttons simultaneously.
For the customers in the U.S.A.
Customer Support Information
If - after you've read through this manual - you still cannot get the
Remote Commander to work properly, call the Sony Customer
Support Helpline at 1-800-822-2217.