Connecting an outdoor antenna and catv cabie, Connecting other vcrs or monitors, Pfetwwmìévgìbàupéiwèutjii – Sony GV-300 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
other Equipment
Connecting an Outdoor Antenna and CATV cabie
Connecting other VCRs or Monitors
If you cannot obtain satisfactory reception with the telescopic antenna, or when recording TV
programs, use an outdoor antenna. For viewing CATV channels, connect the CATV cable.
UHF antenna
(Channel 14-69)
VHF antenna
(Channel 2 - 13)
pfetwwMìéVgìbàupéiwèutjii^
The VIDEO/AUDIOIN/OUT jacks are automatically set to the input or output jacks according to
the operating condition of the unit.
Referto the following diagram:
Mode selected with
Stop or
Playback
INPUT SELECT button
recording mode
mode
TUNER (TV program)
output
output
LINE*
input
output
CAMERA
output
output
• When the LINE mode is selected with INPUT SELECT, the INPUT
or OUTPUT indication appears with LINE.
Note
When the LINE OUT jacks of other equipment are connected to the VIDEO/AUDIO IN/OUT
jacks on this unit, and signals are output from the jacks of the other equipment to this unit,
the picture and sound of the other equipment may be distorted.
In such case, turn off the power of this unit or disconnect the other equipment.
For connection, you can also use the antenna connector EAC-40, the signal splitter EAC-45, the
antenna cord CCD-
6
M, and CCD-2 (not supplied.)
Notes
• Before connecting the antennas, turn off the unit.
• Make connections firmly. A loose connection may cause a distorted picture.
• When using the unit in a car, use the optional VCA-3W or VCA-4E car antenna, etc. For details,
refer to the instruction manual of the car antenna.
54
55