Precautions – Sony GV-300 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To Edit from This Untt to Anothor VCR
Signal flow
If the VCR to be connected has a monaural audio input only, use a commercially available con
necting cord such as VMC-710/720M. In this case, connect to the AUDIO L and VIDEO jacks.
68
Precautions
Operation
• Operate the unit on 6.0 V (battery pack)/7.5 V (AC power adaptor)/6.5 V (DC pack DCP-77).
• For DC or AC operation, use the accessories supplied or
recommended in this manual.
• Should any solid object or liquid fall into the cabinet, unplug the unit and have it checked by
qualified personnel before operating it any further.
• Avoid rough handling or mechanical shock to the unit.
• Do not apply excessive force to the LCD.
• Remove and store video cassettes after recording or playback.
• Do not wrap up the unit and operate it because heat may build up internally.
• Avoid using and storing the recorder in the following locations;
— Locations susceptible to vibration
— Locations exposed to strong magnetic fields
~ Locations near TV or radio transmitters where strong radio waves are generated
• Do not place the unit on the sand.
Cm
• When the unit is not used for a long period of time, periodically turn on the power, operate the
recorder and play back a tape for about three minutes.
• Clean the recorder body with a dry, soft cloth, or a soft cloth lightly moistened with a mild deter
gent solution. Do not use any type of solvent which may damage the finish.
69