Step 2: setting up the base unit (continued), Notes, Choose the dialing mode – Sony SPP-S9101 User Manual
Page 10: If you aren't sure of your dialing system
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 2: Setting up the base unit (continued)
Notes
• Use only the supplied AC-T123 AC power adaptor.
Do not use any other AC power adaptor.
• Connect the AC power adaptor to a continuous power
supply.
• Place the base unit close to the AC outlet so that you
can unplug the AC power adaptor easily.
Polarity of the plug
«>-
Tip
If your telephone outlet is not modular, contact your
telephone service company for assistance.
Modular
Choose the dialing mode
For the telephone to work properly, select an appropriate dialing mode
(tone or pulse).
DIAL MODE switch
Depending on your dialing system, set the DIAL MODE switch as
follows:
If your dialing system is
Set the switch to
Tone
T
Pulse
P
If you aren't sure of your dialing system
Make a trial call with the DIAL MODE switch set to T.
If the call connects, leave the switch as is; otherwise, set to P.
10“
Getting Started