Sony SPP-S9101 - Manual (Page 21)

Receiving calls
1
When you hear the phone ring,
pick up the handset from the
base unit, and press (TALK).
"TALK" appears on the display
and the display also shows the
operation duration in hours,
nainutes and seconds.
When you're done talking, press
( O F F ) or replace the handset on
the base unit.
The display goes off.
wi
W
fit
V)
Tip
If you have subscribed to the Caller ID service;
• the caller's number and/or name appears on the display when you receive a
call (see page 29)
• the ringer sound changes to a higher tone if the call matches the number
stored on ONE-TOUCiH DIAL buttons or in the Phone Directory (memory
match function; see page 29).
To switch to another call ("call waiting" service*)
Press ( CALL WAITING/FLASH ).
Press the button again to get back to the first caller.
• You need to subscribe to the service from your telephone company.
To turn the ringer off
Set the RING switch on the bottom to OFF.
The handset won't ring. You can still make calls, and
cdso receive calls if emother telephone connected to
the same line rings to iitform you on incoming calls.
You can also page the handset from the base unit.
Basics 21“