Clarion RS10 - Manual (Page 16)

13
© 2006 Directed Electronics—all rights reserved
Programming Options
Programming options control your system's normal, operational
set-up. Most options do not require additional parts, but some may
require installation labor.
The following is a list of the programmable options, with the
factory settings in Bold.
■ 12, 24, or 60 minute run time. your system can be pro-
grammed to allow the vehicle to run for 12, 24, or 60 min-
utes when remote engine started. Can be set up to minute
increments by your installer.
■ 3, 6, 9, or 12 minute timer mode run time. Your system can
be programmed to allow the vehicle to run for 3, 6, 9, or 12
minutes when remote engine started in timer mode. Can be
set up to 16 minutes by your installer.
■ Comfort closure is a programming option which closes the
vehicle’s windows after remote locking.
■ Parking lights flashing or constant. Your system can be pro-
grammed to turn on the parking lights for the entire remote
engine start operation.