Editing a video source, Select the playback. vcr with edit video, Set the playback vcr to the playback mode – Sony STR-D1011 User Manual
Page 26: Press edit audio, Select the audio program source, Adding new sound on a video tape during video, Editing, Trtriitr
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Editing a Video Source
Adding New Sound on a Video Tape during
Video Editing
During video tape editing, you can add the desired sound
on the recording VCR from various audio program sources.
POWER — ON
^ Video signals
>=> Audio signals
VCR 2 1
2 , 3 , 6 5
VCR 1
6
to VIDEO 2
VIDEO IN
WD|~
to VIDEO 1
VIDEO OUT/
AUDIO OUT
■nr
trtriitr
2 , 3 , 6
Turntable
CD player
Tape deck
DAT deck
1
Select the playback. VCR with EDIT VIDEO.
To select VCR 2, press EDIT VIDEO so that ”2i> 1"
appears on the display.
To select VCR 3, press EDIT VIDEO so that "3o 1”
appears on the display.
Set the playback VCR to the playback mode.
At the point where audio dubbing starts, press
the pause button on the playback VCR.
Press EDIT AUDIO.
AUDIO appears on the display.
Select the audio program source.
Release the pause mode of the playback VCR
and set the VCR 1 to the recording mode.
Start playback of the selected audio program
source.
Video dubbing starts and the audio program source
is also recorded on the VCR 1 simultaneously.
26