Hooking up the system, Connecting speaker systems, On the impedance selector – Sony STR-D1011 User Manual
Page 8: Note
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Hooking Up the System
Connecting Speaker Systems
Front, center and rear speakers can be connected to this unit.
Front Front
speaker (R) speaker (L)
On the IMPEDANCE SELECTOR
The STR-D1011 has the IMPEDANCE SELECTOR for front
speakers.
When using the front speakers having nominal impedance
from.,4 ohms or higher, set to the 4
Q .
position.
When using the front speakers having nominal impedance
from 8 ohms or higher, set to the 8
Q
position.
Note
Use the front speakers having nominal impedance of more
than 8 ohms in the SURROUND mode.
Note
When connecting the speaker cord to the speaker terminal,
make sure that the polarity (+ and -) of the speaker cord is
correct. If the polarity is reversed at either speaker, the
sound will be distorted and will lack bass.
8