Samsung WA80V3 - Manual (Page 6)

sotting up your washor
CONTROL PANEL
For more details, see oontrol panel of your washing maohine.
0 ci S 0 0 0 0 0 0
Q POWERBUTTON
Press this button once to operate.
Press it again to turn the power off.
1 — ) START/PAUSE
BUTTON
Use to pause and restart the operation.
To change the washing procedure during an operation,
press this button to stop, and again to restart after changing the procedure.
rn PROGRAMSELECT
UU BUTTON
Each time the button is pressed, the washing program changes;
Fuzzy ^ blanket ^ wool ^ quick ^ soak ^ clean tub
Q FILTERCHECK
When the wash is finished, the warning lamp lights up on the filter
check. When the door is opened, it turns off. (This is not a fault.)
When the Magic filter is clogged, foreign materials may start
sticking to the laundry. To ensure a clean wash, please remove
foreign materials from the filter after every wash.
rn REMAININGTIME,
DELAYSTARTTIME,
ERROR DISPLAY
Displays the remaining wash time.
Displays the reserved delay start time.
Displays the error state if a problem occurs in the washing machine
so that you can take action.
Q AIRTURBOBUTTON
Press this button to speed dry your laundry.
This function can only be selected if a spin cycle is set.
You can add this function to all program except for the Wool program.
Q FUNCTION BUTTON
With every press of this button, the function changes;
Wash,Rinse,Spin^ Wash ^Rinse ^Spin^Wash&Rinse^Rinse&Spin
^Wash,Rinse,Spin
t — \ WATERLEVEL
BUTTON
The water level is automatically adjusted. However, you can select
the water level manually by pressing this button.
Mid ^ High ^ Mid ^ Low ^ Extra low ^ Low ^ Mid
/ — \ WATERSUPPLY
BUTTON JilttelL
Each time this button is pressed, the type of water is selected as
follows. Cold ^ Cold + Hot ^ Hot ^ Cold
6_Setting up your washer
WA91U3-02594C_EN.indd 6 2008-04-11 ¿AA u 11:42:35